The Deep Groove Ball Bearing, known as 6210-2RS-CM-KOYO JTEKT, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

These ball bearings are made of high quality Chrome Steel and are pre-lubricated with grease from the factory and are available in both RS (Rubber Seals) and ZZ (Metal Shields) configurations. The 6201-2RS and 6201-ZZ has a 12 mm ball bearing that is found in many applications. The 6201-2RS ball bearing has two contact rubber seals, one on each side of the ball bearing. The 6201-ZZ bearing has two non-contact metal shields, one on each side of the ball bearing. If your application requires a 6201 ball bearing with only one seal or shield you can simply remove one of the shields or seals. This 12 mm ball bearing is a high quality product and can operate efficiently in many demanding applications.

Image

All orders are processed daily and shipped out based on stock availability. We ship via UPS, USPS, Truck Service. Free shipping items will be shipped either USPS or UPS. Please note that USPS and UPS delivery dates are estimates only not guaranteed. We currently do not export.

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

Image

The Deep Groove Ball Bearing, known as 6210-2RS-CM-KOYO JTEKT, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

The Deep Groove Ball Bearing, known as 6210-2RS-CM-KOYO JTEKT, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".