Image

The Deep Groove Ball Bearing, known as 6309-2RS-C3-SKF SKF, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

Image

These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

We use small text files called cookies to give you the best experience on our website and help us show you relevant information. You can choose whether to manage these or allow them all. See our cookies page for more information.

The Deep Groove Ball Bearing, known as 6309-2RS-C3-SKF SKF, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

We use small text files called cookies to give you the best experience on our website and help us show you relevant information.You can choose whether to manage these or allow them all. View Cookie Policy.

Over time bearings can fail if water gets to them, should the bearing seal be damaged. If you notice crunching noises while the drum is spinning, it could be time to replace the bearings. With this replacement bearing, you could soon be back to a washing machine that sounds back to how it should, and perform to full working capability once again.

The Deep Groove Ball Bearing, known as 6309-2RS-C3-SKF SKF, has an inner diameter of 45 mm, an outer diameter of 100 mm and a thickness of 25 mm.

Image

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

© 2024 All rights reserved This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.