These suffixes mean "with 1 or 2 sheet metal deflectors", for dust-tightness. At 123Roulement, we specify whether the bearing is sealed on 2 sides with "ZZ".

These suffixes mean "with 1 or 2 rubber seals". At 123Roulement, we use the number "2" to specify when the bearing is sealed on both sides.

The Deep Groove Ball Bearing, known as 6210-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

The 6307-2RS/C3 Sealed Metric Radial Bearings (Also known as Deep Groove or Single Row Bearings) are ideal for Car and Motorbike repair, Fans and pumps. Rubber seals help to keep moisture and dirt out of the bearing. PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Image

The Deep Groove Ball Bearing, known as 6210-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

This service is available to Mainland UK addresses, however it may take a little longer for Highlands and Islands. If you are unsure please phone where we would be delighted to help.

This suffix indicates that the bearing is designed for very high operating temperatures. In general, the temperature is indicated after this suffix.Beware, these bearings are not suitable for all applications, and will require a high temperature for optimum service life.

Deep Groove Sealed TIMKEN Bearing (C3) 35x80x21mm Specifications Inside Diameter : 35mmOutside Diameter: 80mm Width: 21mm Shield Type: Rubber Alternative Part Numbers: 6307-2RS/C3,6307RS/C3 Brand: TIMKEN No minimum order Quantities/Order Value

The 6307-2RS/C3 Sealed Metric Radial Bearings (Also known as Deep Groove or Single Row Bearings) are ideal for Car and Motorbike repair, Fans and pumps. Rubber seals help to keep moisture and dirt out of the bearing. PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Bearing Station stock a full range of Bearings, Belts, Chains, Pulleys, Sprockets, Couplings, Adhesives & Sealants, Oil Seals, O Rings, Electric Motors, Link Belting, SKF Maintenance Products, Freudenberg Seals and much, much more from the world’s leading manufacturers backed up by great service, technical backup and prices for all budgets.

Means "increased internal clearance". Often referred to as high-speed, this means that the bearing is designed for high rotational speeds and moderately high temperatures. CAUTION: a bearing with increased internal clearance will not operate optimally at low speeds. Please refer to the data sheet for the bearing you are looking for to find out its rotation speed limit.

A stainless steel bearing is generally magnetizable, as it is made from AISI 420 stainless steel, which is harder and more shock-resistant than standard stainless steel (AISI 304).To check whether your bearing is made of stainless steel, simply read the reference engraved on the side of the bearing. This reference should begin with the prefix "S" meaning "Stainless Steel".

The ABEC standard is used to classify bearings according to their machining tolerance. This standard is regularly called into question because it does not include certain technologies that are important for guaranteeing proper operation, both in terms of efficiency and bearing life.123Roulement therefore makes little use of this standard.

These suffixes indicate that the cage (the part of the bearing that holds the balls apart) is made of polymer material. Usually made of glass-fiber-reinforced polyamide.

Image

All delivery times quoted are from when the goods leave ourselves.  Please note that during Christmas delivery make take a little longer due to the busy Period

Use the table below to see our carriage charge or use our handy carriage calculator on the shopping cart page as you add products.

The Deep Groove Ball Bearing, known as 6210-SKF SKF, has an inner diameter of 50 mm, an outer diameter of 90 mm and a thickness of 20 mm.

Products   /   Bearings   /   Ball Bearings   /   Deep Groove Bearings   /   Metric   /   Rubber Sealed   /   6300 Series   /   Deep Groove Sealed TIMKEN Bearing (C3) 35x80x21mm

Some bearings are available with more or less important variants (high or low internal clearance, special grease, very high temperature, etc.). These variants are systematically indicated by prefixes and suffixes in the part number.For example, the suffix "2RS" means that the bearing is splash-proof, thanks to a sealing flange on both sides of the bearing.The suffix "C3" means that the bearing has increased internal clearance, and will require a higher operating temperature, or a higher rotation speed.

Please note if you do not see your country listed on the checkout please email us at sales@bearingstation.co.uk and we shall be happy to send you a quotation with delivery included.