FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.

When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.

AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.

Igloo 10 Gallon Cooler Igloo Party Bucket Cooler Klein Tools Speaker Klein Tools 8-in-1

Image

32oz Water Bottle Throw Blanket 30 piece Hex Set Telescopic Pick Up

Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.

d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.

VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.

RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.

GX-6F Pro Golf Range Finder Bushnell Outdoorsman Speaker Jaeger 24px Ratcheting Wrench Set Aspen Beverage Bucket

Golf Cooler 11-in-1 Screw Driver Set Gorilla Grip Knee Pad John Deere Oilskin Hat

ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.

Specifications: (D) Roller O.D. (mm) 80 (C) Roller Width (mm) 35 (d) Stud Dia. (mm) 30 (B1) Stud Length (mm) 63 (C) Basic Dynamic Load Rating (newtons) 95,000 (G1) Thread Length (mm) 32 (G) Thread (mm) M30x1.5 (g) Mass (grams) 1,800 (Cow) Basic Load Rating (Track Roller) Static (newtons) 93,000 (Co) Basic Static Load Rating (newtons) 133,000 d2 47 SMITH Bearing Number NUKR-80 M 8 (n) Max. Speed (rpm) 1,800 M1 4 B2 15 (B) Overall Length (mm) 100 rs 1.1 C1 1 Additional Note1 The basic load rating C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted in a housing bore with the normal rolling bearing fit. When used as a track roller, the load rating Cw and Cow apply. Additional note2 Limiting Speed for grease lubrication: For oil lubrication speed may be increased by up to 30%. For Sealed bearings, speed in chart should be reduced by 30%. Additional note3 Tolerance for “C” Raceway Width is +0.00/-0.12 mm (Cw) Track Roller Dynamic Load(newtons) 67,000