SKF Lincolnlubricationsystems

Image

This 25 x 62 x 17 mm (6305-2RS) bearing is a metric deep groove ball bearing. The 6305-2RS inner diameter is 25 mm, the 6305-2RS outer diameter is 62 mm, the 6305-2RS width is 17 mm. This bearing has rubber seals on both sides to protect the bearing from dust or any possible contamination, which can extend bearing life, and retain the lubricant in the bearing.

Lubrication unit manufacturer for test benchusa

Image

The jet lubrication system consists of a piston pump, an electromagnet, nozzle tubes and an oil tank. Lubricant is first drawn by suction from the tank into the body of the pump. A magnet then accelerates the piston, which pumps the oil into the nozzle tubes. The nozzle tubes spray the lubricant to where it is needed. The width of the spray jet depends on the viscosity of the oil, the number of outlets, the tube lengths and the magnetic power. The nozzle tubes need to be vented to obtain a satisfactory spray pattern. Routing the lines up an incline to the outlet simplifies venting.

Jet spray systems are used with lubrication points that are difficult to access and with applications where direct installation at the lubrication point is impossible due to the installation location. This system can be implemented as a consumption lubrication system with oil.